network ifname
This command sets a RIP enabled interface by ifname. Both the sending and receiving of RIP packets will be enabled on the port specified in the network ifname command.
The no network ifname command disables RIP on the specified interface.
Syntax
network ifname no network ifname
|
Interface Type (ifname) |
Interface ID |
|
|---|---|---|
|
gigabitethernet |
GigabitEthernet interface slot and port (VLAN ID is optional) |
[SLOT/PORT.VLANID] |
|
cellular |
Cellular interface ID |
0/0 |
|
gre |
Tunnel GRE ID |
[1-255] |
|
ipip |
Tunnel IPIP ID |
[1-255] |
|
l2tp |
L2TP ID |
[0-99] |
|
pppoe |
PPPoE interface ID |
[1-3] |
|
pptp |
PPTP ID |
[0-99] |
|
vlan |
Vlan ID |
[1-3999] |
|
loopback |
Loopback ID |
[1-5] |
|
bvi |
Bridge interface |
[1-255] |
Default
NA
Command Mode
Privileged User
Example
This example sets the RIP enable interface by ifname.
(conf-router)# network vlan 1